Courtesy/News Source: swimmingpool.com

Your pool and spa are big investments, so it’s important to maintain them year-round. In this blog, we’ll go over the winterization basics for inground pools and above ground pools, as well as touch on spas and recommended products.

• If your area is subject to frequent hard freezes, properly winterize your pool equipment and piping then cover the pool.
• In milder climates, keep your pump running as you normally would to keep the pool water from freezing.
• Above Ground Pools are particularly susceptible to winter damage and require extra care and attention.
• Spas should be enjoyed throughout the winter months. Closing your spa is not recommended unless it will not be used for at least three months (i.e. in a vacation home).

How to Winterize Inground Swimming Pools

Follow these 6 steps to close your pool in areas with frequent hard freezes:

1. Properly balance pool water. Also add shock treatment (chlorinated or non-chlorinated).
2. Lower the water level to below the skimmer.
3. Clear pipes and equipment of water using a blower or compressor and plug the pipes at the pool.
4. Add swimming pool antifreeze to the lines to prevent freezing.
5. Place a Gizzmo* (or similar device) in the skimmer to seal it and absorb pressure from ice. Ask your local Pool Retailer for more details on the Gizzmo for your skimmer.
6. Install your safety cover or winter tarp cover using water tubes to secure.

Rain and snow can add hundreds of pounds of pressure to your winter pool cover. A pool cover pump will keep standing water from weighing it down and will extend the life of your cover.

To prepare your pool for the winter in milder climates:

1. Make sure that the pump is running during periods of below freezing temperatures.
2. Keep the water properly balanced and sanitized throughout the off-season months.
3. Some pool owners also choose to install a Winter Cover or Safety Cover.

How to Winterize Above Ground Swimming Pools

1. Properly balance pool water. Also add shock treatment (chlorinated or non-chlorinated).
2. When preparing to winterize the pool, do not drain water below the recommended level. NEVER DRAIN POOL COMPLETELY.
3. Lower the water level to below the skimmer opening and plug returns in the pool. Install the skimmer faceplate cover.
4. Clear pipes and equipment of water and insulate them. Remove and store your pump.
5. Install the air pillow and then the pool cover.
6. Store your pump, hoses, and other in-line equipment that can be removed.

Common reasons why above ground pool walls could collapse or fail:

1. The skimmer catches water which then freezes, causing the skimmer to become too heavy for the wall to support. This eventually causes the wall(s) to collapse.
2. An ice expansion pushes out against the walls, causing the walls to buckle under the immense pressure and weight of the ice.

Recommended Products:

Freezing can create costly damages to your swimming pool or spa. The best way to protect your pool or spa from freeze damage is to prevent it from happening. Properly winterizing your pool and following these tips can prevent freeze damage from destroying your backyard paradise. We recommend the following products to aid you in your freeze damage prevention.

• Winterizing Kits for correct chemical balance throughout the winter months and protection of all non-mechanical elements of your swimming pool.
• Blowers clear pipes and equipment of water prior to being plugged and insulated to protect them from the elements.
• Skimmer Faceplate Covers prevent your skimmer from retaining water which can freeze and possibly damage the pool wall.
• Gizzmos are designed for inground skimmer ice expansion protection.
• Water Tubes and Air Pillows are used under winter covers for ice expansion prevention.
• Balancing and Shock Chemicals or Anti-Freeze will maintain your water and prevent freeze damage.
• Rubber Plugs will prevent freezing water damage from expanding and damaging your return lines.